home  >  products  >  gentWIRE  >  MULTI options
 

gentles devices are small, lightweight and easy to use with a RC control system.

Wired controllers for Sony cameras with MULTI interface, 781, 181 and 769M, 21M, come with various camera plug options.

Note that not all plug options are offered on all products,
the available options are detailed on each product page.
As you put the product in the shopping cart you can select
the best available option for your application.

  • STRAIGHT PLUG (S). The straight plug is similar is style to the plug supplied by Sony on its own accessories.
    With this style the cable can extend beyond the gimbal and can easily foul on metalwork and brackets.
    At least 50mm of clearance is required for this option.
  • RIGHT EXIT CABLE (R). This is a 90degree or right angled plug, to minimise the cable projection, the plug is 27mm from the tip of the plug to the rear of the plastic boot. On older models of Sony camera this allows the cable to exit to the rear away from the camera lens, e.g. A6000 Carefully study the diagram shown on the right to ensure this is the correct cable for your application.
  • LEFT EXIT CABLE (L). This is a 90degree or right angled plug, to minimise the cable projection, the plug is 27mm from the tip of the plug to the rear of the plastic boot. On newer models of Sony camera this allows the cable to exit to the rear away from the camera lens, e.g. RX100Mk4. Carefully study the diagram shown on the right to ensure this is the correct cable for your application.

Other Compatibility Notes

  • The right-angled connector used on our LEFT and RIGHT EXIT cables has a overall length of 27mm. That's 18mm of plastic and 9mm metal plug. The spacing required as clearance depends on each camera model and the exact mounting of the socket.
    A rough guide for clearance from the camera body is ~20mm.
  • The MULTI cable contains many wires and is not as flexible as other cables. We recommend our product be mounted beside the camera and the servo (PWM or SBUS) cables are taken off the gimbal to the RC receiver. By doing this it is possible to control all functions with just 2 very thin wires. We also supply special extra-thin and flexible servoLEADs

  Gentles Limited © 2013 web design by www.kb3d.co.uk