|
|
Products to help remote photographers produce stunning results
with imagination & our products there's no limit to the unusual angles achieved
:: news ::
July10: gentVU altiOSD operating voltage change
 Part
obsolescence means we have to change the operating voltage for all new shipments
from 3-9volts to 5.5-12volts. This takes effect from July 2010. New parts can be
identified by the omission of the large brown axial inductor at the top of the
board as shown right.
The original design voltage was chosen to allow the common NiCd
4.8V battery to be used. With more and more systems operating from 7.2 and 10.8
volt LiPo batteries this change should have minimal impact on system design.
May10: gentLED - new Manufacturers support IR!
 Generally
less Point and Shoot cameras have IR than 5 years ago but Sony's DSC-H50 and
Fuji's Finepix S2000HD were introduced with IR - you can now control these
cameras from a RC system, or with an intervalometer using gentLED. Maybe more
cameras with IR are on the way!
More Details...
Mar10: gentLED-liveVIEW, shutter and video control
Taking
advantage of Liveview mode on the Canon 5D, 7D, 500D and 550D this device allows
control of stills and video start/stop from one RC channel by using the camera's
Liveview mode..
Allows video to be recorded and full resolution stills TOGETHER.
More Details...
Feb10: clickPAN-SDM Camera controller
 Use
the power of scripting within a SDM modified Canon camera to control 2 servo
motors to make a automatic rig for autoKAP or any other control application.
Uses Canon cameras and the SDM
software enhancement.
More Details...
|
